FT 3260 Flanged thermowell with Helical strikes

FT 3260 Flanged thermowell with Helical strikes

FT 3260
true
Thermowell
Design
Machined and drilled from bar stock with machined spiral finish. Reduces vibration and gives a better temperature reading with smaller tip diameters.
Final design according to:
ASME PTC19.3 TW2016
ASME Report nov. 2011, vol. 133/041102
Materials
SS316, SS310, SS321(H), SS347(H), Monel 400, Inconel 600, Hastelloy C276
true
Insert / Stem
Stepped
20 mm, reduced point L=78mm x d=12 mm
Straight
Standard diameter 22 mm, or to be specified
Bore
6.6mm standard, other diameters possible
Bottom thickness
5.0mm standard, other thicknesses possible
Concial
Diameter from 25 to 20 mm at the tip, or to be specified
Female conncection
1/2" NPT, 3/4" NPT, 1/2" BSP, M20x1.5 or other threads possible
true
Flange
Flange Facing
Flat Face, Raised Face, Ring Type Joint, Tongue Face, or Groove Face
Flange weld
Full penetration, partial penetration or screwed flange seal welded
Standarts
ASME B16.5, DIN 2526/2527, or EN 1092-1
true
Dimensions
Insertion length
To specify
Lagging
To specify, standard 60mm
Flange size
To specify
Flange rating
To specify
Flange facing
To specify
true
Options
Protective coatings such as HALAR, PFA, Ruby Red
Radiographic test (X-ray)

Customisation possibilities

You can remark the customisation in your quote

PRODUCTCODE

FT 3260
Material

Flange size

Flange rating

Flange facing

"U" LENGTH IN MM

"X" LENGTH IN MM

Deze site is geregistreerd op wpml.org als een ontwikkelingssite. Schakel over naar een productiesite sleutel om remove this banner.