PyroSigma infrarood sensor met display

PyroSigma infrarood sensor met display

PyroSigma
true
Product information
Small low-cost industrial infrared temperature sensor up to +1000°C. Fully configurable for averaging, hold processing, emissivity, output scale etc. with display.
true
Technical information
Temperature range
0 to 1000°C
Temperature output
Voltage: 0-5 V DC or 0-10 V DC output, linear with measured temperature, rescalable
Alarm output
Open collector alarm output with temperature threshold and hysteresis, configurable
Note: Alarm and temperature outputs may be used simultaneously
Field of view
15:1 (see Field of View Diagram)
Accuracy
± 1.5% of reading or ± 1.5°C, whichever is greater
Repeatability
± 0.5% of reading or ± 0.5°C, whichever is greater
Response time
125 ms (90% response)
Configuration
Via built-in display and controls
Emissivity setting
Adjustable 0.2 to 1.0
Max. Temperature span (Voltage output)
1000°C
Min. Temperature span (Voltage output)
100°C
Spectral range
8-14 μm
Max. Supply voltage
28 V DC
Min. Supply voltage (at sensor)
12 V DC (for 10 V output)
6 V DC (for 5 V output)
Max. Current draw
6 mA
true
Configuration
Configurable parameters
Temperature range for voltage output Output voltage range and scale Alarm output threshold and hysteresis Emissivity setting Reflected temperature Signal processing (see below)
Temperature units
°C / °F
Signal processing
Averaging Period (0.125 to 60 seconds), Peak / Valley Hold Mode, Hold Period (0.125 to 120 seconds)
true
Mechanical information
Construction
Black anodised aluminium and blue ABS
Cable length
1 metre standard (longer lengths available to order)
Weight with 1 metre cable
65 g
Environmental rating
IP65
Ambient temperature range
0°C to 70°C
Relative humidity
95% max. non-condensing

Customisation possibilities

You can remark the customisation in your quote

PRODUCTCODE

PyroSigma
No data was found
Deze site is geregistreerd op wpml.org als een ontwikkelingssite. Schakel over naar een productiesite sleutel om remove this banner.