Contact

AOIP CALYS 1000 Tabel gedocumenteerde multifunctionele kalibrator

Download Datasheet
AOIP CALYS 1000 Tabel gedocumenteerde multifunctionele kalibrator
AOIP CALYS 1000 Tabel gedocumenteerde multifunctionele kalibrator - Afbeelding 2
AOIP CALYS 1000 Tabel gedocumenteerde multifunctionele kalibrator - Afbeelding 3

AOIP CALYS 1000 Tabel gedocumenteerde multifunctionele kalibrator

Download Datasheet
true
Product information
CALYS 1000 is a field documenting multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries.
Suitable for all field and lab measurements, it can simultaneously measure, generate and record over two isolated channels various signals of temperature, pressure, resistance, process and frequency in one single instrument.
Providing extended functionalities (temperature simulation, scaling, steps, synthesizer, statistical functions, user-programmable configurations…), CALYS 1000 makes advanced data exploitation and full data traceability easier, as well as quick access to functions by menus.
The instrument simultaneously measures and simulates:
Temperature: Up to 0,014% RDG
Resistance: Up to 0,012% RDG, 4 kΩ range
Current: Up to 0,0175% RDG, 50 mA range + 24 V loop supply
Voltage: Up to 0,013% RDG, 50 V range
Frequency: Up to 0,005% RDG, 20 kHz range (10 kHz in simulation)
Pressure: with an external pressure module (ref. ACL433) (comparison calibration with a pressure pump).
true
Calibration procedures and DATACAL software
Using this user-friendly instrument, calibration tasks can be quickly carried out over the whole process chain. Take the documenting process calibrator to the field with you during the whole week with 10 calibration procedures stored in the device.
Run the procedure after connecting the probes to the instrument and save the results for onsite easy and quick calibration. Back to the office, you can then upload the data on a computer in order to issue customized calibration certificates with dedicated calibration software DATACAL
true
Technical information
RTD sensors
Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, Cu10 or Cu50
Thermocouples
K, T. J, E, R, S, U, B, L, C and N
Pressure (with external sensor)
0-1000 bar (absolute)
0-30 bar (relative)
DC current
0-50mA
DC current emission
0-24mA
DC voltage
100mV-50V
DC voltage emission
100mV-50V
Resistance
400-4000 Ohm
Resitance emission
40-4000 Ohm
Frequency
20kHz
Frequency emission
1000Hz-10kHz
true
Mechanical information
Size
340 x 320 x 160 mm (L x W x h)
Weight
4.6 Kg
Display
240 x 320 pixel liquid crystal graphical display with backlite & contrast control Display of result as table of values or trend curve
Power supply
230 V ±10 %, 50/60 Hz
Battery
Type: Lithium-Ion, Charging time: 3 hours, Lifetime: 8 hours
Communication ports
USB
Reference range
23°C ±5°C (RH: 45 to 75 % w/o condensing)
Operating reference range
-10 to 50°C (RH: 20 to 80 % w/o condensing)
Limit operating range
-15°C to +55°C (RH: 10 to 80 % w/o condensing) (70 % at 55°C)
Storage temperature limits
-30°C to +60°C
Maximum height
0 to 2000 m
IP protection
IP54 according to EN 60529

Customisation possibilities

You can remark the customisation in your quote

PRODUCTCODE

No data was found
AOIP CALYS 1000 Tabel gedocumenteerde multifunctionele kalibrator
AOIP CALYS 1000 Tabel gedocumenteerde multifunctionele kalibrator - Afbeelding 2
AOIP CALYS 1000 Tabel gedocumenteerde multifunctionele kalibrator - Afbeelding 3

Related Products

Gerelateerde producten

Deze site is geregistreerd op wpml.org als een ontwikkelingssite. Schakel over naar een productiesite sleutel om remove this banner.